How to Prepare a Refrigerator and Washing Machine Before Moving

Refrigerator and washing machine prepared before moving

A refrigerator may look ready to move once the food has been removed, and a washing machine may appear prepared once its cycle has finished. However, both appliances can retain water, contain removable parts that may shift during transport, and require specific precautions before being moved.

Preparing them properly helps reduce the risk of leaks, unpleasant smells, scratched surfaces and damage caused by unsecured internal components. The exact process depends on the appliance model, so always check the manufacturer's instructions before disconnecting or transporting either machine.

This guide explains how to prepare a refrigerator and washing machine before moving, what to do before the moving team arrives, and which tasks may require a qualified technician.

Why should you prepare appliances separately?

Large household appliances are different from ordinary boxes and furniture. Refrigerators contain cooling systems and may have water connections, ice makers or removable shelves. Washing machines contain hoses and internal drums that may need to be secured for transport.

Simply unplugging an appliance does not necessarily make it ready to move.

A useful approach is to divide preparation into four stages:

  • Empty and clean: Remove contents and clean the appliance interior.
  • Disconnect and drain: Isolate power and water connections safely.
  • Secure and protect: Prepare removable parts, cords, hoses and doors.
  • Plan transport and setup: Check the route, handling requirements and installation instructions.

Starting early gives the appliance time to dry and lets you identify any connections or transport hardware that need attention.

How to prepare a refrigerator before moving

Refrigerators need time for food removal, defrosting where applicable, cleaning and drying. If your model includes an ice maker or water dispenser, its water supply must also be handled according to the manufacturer's instructions.

1. Empty the refrigerator and freezer

Remove food, drinks, ice trays and other contents. Plan how to use or safely store perishable food before the appliance is switched off. Do not leave food inside during transport.

Remove ice from the ice bin and follow the manual for switching off an automatic ice maker. If the refrigerator has a water dispenser, check whether it has a connected water line.

2. Defrost the appliance when required

If your refrigerator or freezer needs manual defrosting, allow enough time for the ice to melt before moving day. The time required varies by model and the amount of ice present.

Place towels or suitable absorbent material around the appliance to catch water. Keep the floor dry to reduce slipping risks, and never chip away ice with sharp tools that could damage the appliance.

Some frost-free models still need to be switched off and dried before transport. Follow the manufacturer's guidance rather than assuming every refrigerator needs the same defrosting period.

3. Clean and dry the interior

Wipe shelves, drawers and interior surfaces using a cleaning method suitable for the appliance. Dry all surfaces thoroughly before transport.

Moisture trapped inside a closed refrigerator can contribute to unpleasant smells. If the appliance will remain switched off after arrival, follow the manufacturer's instructions for storing it safely, including any guidance about keeping doors ajar when appropriate.

4. Disconnect water lines and protect loose parts

If your refrigerator has an ice maker or water dispenser, the water connection may need to be shut off and disconnected. If you are not sure how to isolate the supply or disconnect a fitting, ask a qualified technician or plumber.

Remove loose shelves, trays and drawers when the manual recommends doing so. Wrap and pack these parts separately, or secure them as directed by the manufacturer. Secure the power cord so it cannot drag under the appliance or catch on anything.

5. Protect the exterior and plan upright transport

Use suitable protective materials to reduce the risk of scratches and dents. Check the refrigerator's height, width and depth against doorways, hallways, lift doors and the loading route.

Refrigerators are generally best transported upright, but the correct handling method depends on the model. Follow the owner's manual, and do not assume a refrigerator can safely be laid on its side.

How to prepare a washing machine before moving

Washing machines can retain water in their hoses, filters and internal drainage system. They also contain a drum that may need transport bolts or other restraints to prevent movement during transit.

1. Remove laundry and finish the cycle

Check the drum and remove all clothing. If appropriate for your model, run the recommended drain or spin cycle to remove as much water as possible.

Leave the door open for a while, where the manufacturer's instructions allow, so the drum can dry. If the machine already has a leak or drainage problem, do not assume a normal cycle will remove all the water.

2. Turn off the water supply and disconnect hoses

Switch off the appliance and disconnect it from the electrical supply before handling its connections. Close the water supply valves, then disconnect the inlet hoses according to the manual.

Keep a shallow tray, bucket and towels nearby because water may remain inside the hoses. Drain them carefully and secure them so they do not leak onto other belongings during transport.

The drain hose may also contain residual water. Follow the manufacturer's instructions for removing and draining it without damaging the connection.

3. Check the drain filter instructions

Some washing machines have an accessible drain filter or emergency drain tube. Others use different designs. Consult the manual before opening any filter or drain access panel.

If your model allows you to drain residual water through a filter, prepare a shallow container and towels first. Water may come out quickly, so open the access point slowly and follow the manufacturer's steps.

4. Install transit bolts if required

Many front-loading washing machines use transit bolts to secure the drum during transportation. These bolts are often removed during the original installation and kept for future moves.

Check the manual to see whether your model requires them and where they fit. Do not improvise with random screws or force hardware into place. If the required bolts are missing, contact the manufacturer or a qualified appliance technician for the correct solution.

Bosch explains the importance of securing the drum and draining hoses in its guide: Moving a washing machine.

5. Secure the door, hoses and power cord

Once the machine is empty and prepared, secure loose hoses and the power cord so they cannot snag or drag. Protect the outer surfaces with suitable materials, and keep any small parts or transit hardware together in a labelled bag.

Keep the machine upright during transport unless its manufacturer specifies another approved method. Use suitable moving equipment and do not attempt to lift a heavy washing machine without enough capable assistance.

Who should disconnect the appliances?

You can usually handle straightforward preparation such as removing food, cleaning the interior and gathering loose parts. However, electrical, plumbing and gas connections require more care.

  • Refrigerator: Water lines for ice makers and dispensers may need to be isolated and disconnected.
  • Washing machine: Inlet and drain hoses need to be disconnected and drained correctly.
  • Hard-wired appliances: Electrical disconnection may require a qualified electrician.
  • Gas-connected appliances: Arrange a qualified gas professional; do not disconnect gas lines yourself.

Before the moving team arrives, confirm which tasks you will complete and which tasks require a technician. Do not assume transportation automatically includes appliance disconnection, installation or reconnection.


How to protect appliances during transport

Once both appliances are prepared, consider how they will move from their current position to the vehicle and then into the new property.

Measure the route. Check doorways, corridors, corners, lifts and any steps. Measure the appliance and compare its dimensions with the available space, allowing for handles, hoses and other protruding parts.

Protect nearby surfaces. Use appropriate floor protection and take care around walls, door frames and cabinetry. Appliances can be heavy and difficult to manoeuvre through narrow areas.

Keep parts together. Pack removable shelves, drawers, hoses and transit hardware so they are easy to find at the destination. Label bags clearly and keep model-specific parts with the correct appliance.

Use suitable equipment. Heavy appliances should be moved using equipment rated for their weight and dimensions. Keep the appliance secure and follow the manufacturer's handling requirements.

If you are also preparing other household belongings, Crescent Movers has a related guide on preparing furniture before moving. Appliance preparation is different, however, and should follow the specific instructions for each machine.

What should you do after the appliances arrive?

Do not rush to reconnect the appliances as soon as they enter the new property. First, check that the route and final position are suitable and that the appliance has not suffered visible damage.

For the refrigerator, follow the manufacturer's instructions for positioning, levelling, water-line reconnection and the time to wait before switching it on. The correct waiting period depends on the model and how it was transported, so avoid relying on one universal rule.

For the washing machine, check whether transit bolts were installed and remove them as directed before operating the machine. Confirm that the appliance is level, the hoses are connected correctly and the water supply is not leaking. Reconnect power only after installation is complete and safe.

If you are unsure about a water, electrical or gas connection, arrange qualified help rather than testing the appliance by guesswork.

Common appliance preparation mistakes to avoid

Leaving food or water inside: Empty and dry the appliance as instructed before transport.

Moving a refrigerator without checking its manual: Handling requirements can vary by model.

Forgetting washing-machine transit bolts: Check whether your model requires transport restraints.

Disconnecting a water line without isolating the supply: This can cause leaks and water damage.

Taping parts without checking the finish: Adhesive can leave residue or damage some surfaces.

Reconnecting immediately without checking instructions: Installation and start-up requirements differ between appliances.

Assuming all disconnection is included: Confirm who is responsible for electrical, plumbing and specialist work.

Final checklist before moving day

Use this quick checklist to confirm that both appliances are ready.

Refrigerator

  • Food and ice removed
  • Ice maker and water supply handled according to the manual
  • Defrosted if required
  • Interior cleaned and dried
  • Loose shelves and drawers secured
  • Cord secured and exterior protected
  • Transport route and handling instructions checked

Washing machine

  • Drum emptied
  • Water supply shut off
  • Inlet and drain hoses disconnected and drained
  • Drain filter handled according to the manual, if required
  • Transit bolts or approved drum restraints checked
  • Hoses, cord and small parts secured
  • Safe lifting and transport arrangements confirmed

Preparation is complete when the appliances are empty, appropriately disconnected, dry where required, secured for transport and ready for safe handling according to their manufacturer instructions.

Conclusion

Preparing a refrigerator and washing machine before moving takes more than unplugging them. Remove contents, clean and dry where needed, handle water connections safely, secure loose parts and follow the correct transport instructions for each model.

A little advance planning can help prevent avoidable leaks, delays and damage on moving day. If you need help planning the handling of large household items, you can contact Crescent Movers to discuss your moving requirements.

11. Frequently asked questions

1. How long before moving should I prepare my refrigerator?

Start planning a few days ahead if defrosting, cleaning or water-line work is required. The exact time depends on the model and its condition. Check the manufacturer's instructions.

2. Does every refrigerator need to be defrosted before moving?

No. Requirements vary by refrigerator type. Remove all contents and follow the manual for switching off, defrosting, cleaning and drying the appliance.

3. How do I drain a washing machine before moving?

Run an appropriate drain cycle if the machine is functioning, then shut off the water and disconnect the hoses according to the manual. Drain residual water into a suitable container. Some models also have a drain filter or emergency drain tube.

4. Do I need transit bolts for a washing machine?

Some models, particularly many front-loading machines, require transit bolts to secure the drum during transport. Check the manual and use the correct hardware for your model.

5. Can a refrigerator be transported lying down?

Do not assume it can. Upright transport is generally preferred, but handling instructions vary. Follow the manufacturer's guidance for your exact model.

6. Can I disconnect appliance water lines myself?

Only if you can safely isolate the water supply and follow the manufacturer's instructions. If a connection is difficult to access or you are uncertain, use a qualified technician or plumber.

7. When can I switch the refrigerator back on after moving?

Follow the manufacturer's instructions for your model and the way it was transported. There is no single waiting time that is correct for every refrigerator.

8. Should appliances be reconnected by the moving team?

Not automatically. Transport, disconnection, installation and reconnection are separate tasks. Confirm the agreed scope and arrange qualified help for electrical, plumbing or gas work where required.